APC Back-UPS 1350VA/810W 120V 10-outlet 2 USB charging ports AVR LCD interface LAM

BR1350M2-LM Features

Back-UPS PRO BR 1350 VA unit, 10 outlets, 2 USB charging ports, AVR, LCD interface, LAM
Premium battery backup with surge protection for high-performance computers and electronics.
Includes: Coaxial cable, USB cable, User manual

Power Management Function
The energy-saving function cuts power to peripherals when the master device, typically a computer, hibernates or shuts down. Power to peripherals is immediately restored when the master device exits hibernation or powers on.

Transformer-block spaced outlets
Protect equipment with input transformers without blocking access to other outlets.

Green Mode
Operating mode that bypasses electrical components in good power conditions that are not being used to achieve a very high level of operating efficiency without sacrificing protection (patent pending).

Boost and Trim Automatic Voltage Regulation (AVR)
Provides higher application availability by correcting low and high voltage conditions without using the battery.

Adjustable voltage transfer points
Adjust the voltage points (widen or narrow the range) at which your UPS transfers to battery to maximize battery life and protect sensitive electronics.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

Cold-start capable
Provides temporary battery power when the utility power is out.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Adjustable voltage sensitivity
Switch between predetermined voltage transfer points based on power quality (high, medium or low sensitivity) to maximize battery life and protect sensitive electronics.

Technical Specifications

General Features
Brand	APC
Item	UPS
Model	BR1350M2-LM
Rated power in W:	810 W
Rated power in VA:	1350 VA
Main output voltage:	120 V
Output connection type	6 NEMA 5-15R | 4 NEMA 5-15R surge suppressors
Cable length:	1.83 meters
Battery type:	Sealed lead-acid battery
Dimensions	26 cm x 10 cm x 36.8 cm
Weight	11.7 kg
Mounting type	On light fixture cord
Input	Rated operating frequency: 50/60 Hz +/- 3 Hz auto-sensing ((*)) | Input voltage range for main operations: 88...147 V | Maximum input current: 12 A | Switching current capacity: 15 A
Output	Max Configurable Power (Watts): 810 W | Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz sync to mains | Topology: Line Interactive | Wave Type: Stepped approximation to a sinewave | Maximum Configurable Power In Va: 1350 VA | Transfer time: Typical 8 ms: Max 10 ms
Environmental	Operating Ambient Temperature: 0…40 °C | Relative Humidity: 0…95 % non-condensing | Operating Elevation: 0...10000 ft | Storage Ambient Temperature: -15…40 °C | Storage Relative Humidity: 0…95 % non-condensing | Storage Elevation: 0.00…3048.00 m | Audible noise: 45 dBA