Intellinet Outdoor Ultra PoE Extender with 2-Port

This PoE++ Extender doubles the range of two Gigabit Power over Ethernet connections — even in harsh outdoor conditions

The Intellinet Network Solutions 2-Port Outdoor Vandalproof Gigabit PoE++ Extender adds up to 100 m (328 ft.) to the connection distance from a PoE source to one or two output devices via Cat5e or Cat6 cable. This PoE++ (4PPoE) extender does not require an additional power supply as it draws its power from the PoE input.

Designed for Outdoor Use

This PoE++ extender is the right power and data connector for its suitability for a wide variety of environments. Its IP67 water- and dust-proof rating, wide operating temperature range of -20 to 60°C (-4 to 140°F), and IK10 vandal-proof rating mean the Intellinet Network Solutions 2-Port Outdoor Vandalproof Ultra PoE Extender can withstand harsh conditions.

Reduced Cabling Costs

This Ultra PoE Extender helps avoid the expense of installing AC power lines for a wireless access point, network camera, IP phone, or other compliant device. Simply connect the PoE Extender to your LAN switch port via existing Cat5e/6/6a cables to provide DC power as well as transfer data.

802.3bt Power over Ethernet Compliant

This Ultra PoE Extender supports the IEEE 802.3bt over four pairs (4PPoE) protocol, which allows for a 95 W power input. It transmits data at Gigabit speeds and delivers up to 30 watts per port to an IEEE 802.3at or IEEE 802.3af compliant device. Cable length at both ends can be up to 100 meters (328 ft.), bringing the total distance between the PoE source and the device to 200 m (656 ft.).

Simple Installation

This PoE Extender was designed to be as easy as possible to set up and use. All that's needed to get it up and running is to connect its PoE In port to your PoE injector or PoE switch and connect the PoE Out ports to the PoE devices you want to connect (e.g., a VoIP phone and a PoE network camera).