Intellinet Ultra PoE Gigabit Injector 95W 1-port 95W IEEE 802.3bt and IEEE 802.3at af plastic

Inject 95 Watts of Power into your Internet of Things (IoT) or PoE++ Network

IEEE 802.3bt Compliant

The Intellinet Network Solutions Gigabit PoE++ Injector provides up to 95 W using all four pairs of twisted-pair cabling to support IoT applications like lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Card readers and point-of-sale printers need up to 60 watts. Lighting and controller devices require 40 to 50 watts. Some motorized IP Cameras need more than 70 watts. The IEEE 802.3bt standard is an excellent solution to bring power to these critical systems. As many new IEEE 802.3bt powered devices enter the market, you will be ready for them with an Intellinet Network Solutions PoE++ Injector.

Full Compatibility with Existing IEEE 802.3 Power over Ethernet Devices

The Intellinet Network Solutions Gigabit PoE++ Injector helps you connect your IEEE 802.3bt/af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3bt/af/at-powered device (PD) to a switch.

Reduced Wiring Costs

It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE++ Injector to the LAN switch port, and use the existing network cabling to deliver DC power as well as transfer data.

Protected Equipment

Once DC power is connected to your networked equipment through the network cabling, this Intellinet Network Solutions PoE++ Injector ensures that your products are protected from power problems like short circuits (short GRND), current overloads and high voltages.

Technical Specifications

General Features
Brand	Intellinet
Item	Injector
Model	561495
Standard	IEEE 802.3af (PoE), IEEE 802.3at (PoE+), IEEE 802.3bt (PoE++), IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX), IEEE 802.3ab (1000Base-T)
Ports	10/100/1000 Mbps RJ45 data-in and power-out port
Supported media	10Base-T: CAT3 UTP/STP RJ45, 8-pin 100Base-TX: CAT5 UTP/STP RJ45, 8-pin 1000Base-T: CAT5e UTP/STP RJ45, 8-pin
Protection	Overcurrent protection
PoE output pins	Pin 1: DC (+) Pin 2: DC (+) Pin 3: DC (-) Pin 6: DC (-) Pin 4: DC (+) Pin 5: DC (+) Pin 7: DC (-) Pin 8: DC (-)
DIP switch functions	PoE standard selection 802.3af/at/bt compliant Cisco Universal PoE compliant Passive mode for non-compliant equipment (not 802.3bt compliant)
LEDs	Power, data and PoE LEDs
Power input	100 V to 240 V AC, 50 - 60 Hz
Dimensions	109 (L) x 100 (W) x 40 (H) mm [7.48 (L) x 3.94 (W) x 1.1 (H) in]
Operating temperature	0° C ~ 40° C
Storage temperature	-40° C ~ 70° C
Operating humidity	10% ~ 90% RH, non-condensing
Storage humidity	10% ~ 95% RH
Warranty	3 years